Assessment Year | 2023 |
---|---|
Principal Product | Gourmet Confections |
NAICS | 311352: Confectionery Manufacturing from Purchased Chocolate |
SIC | 2064: Candy and Other Confectionery Products |
Sales Range | $10 M to 50M |
# of Employees | 150 |
Plant Area |
80,000
ft2
|
Annual Production | 8,000,000
lb
|
Production Hrs. Annual | 4,160
hrs
|
Location (State) | California |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $415,482 | 1,565,632 |
kWh
|
$0.27 |
Electricity Demand | $462 | 5,362 |
kW-mo/yr
|
$0.086 |
Natural Gas | $230,006 | 14,307 |
MMBtu
|
$16.08 |
TOTAL YEARLY COSTS | $645,950 | |||
RECOMMENDED SAVINGS* | $34,030 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $8,210 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Electricity Fees Savings |
---|---|---|---|---|---|---|---|
01 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $2,218 | $962 |
$2,218
8,359
kWh
|
- | - | |
02 | 2.2523: Reduce infiltration to refrigerated areas; isolate hot equipment from refrigerated areas | $23,445 | $5,613 |
$23,445
88,249
kWh
|
- | - | |
03 | 2.3132: Recharge batteries on during off-peak demand periods | $270 | - | - | - | $270 | |
04 | 2.4133: Use most efficient type of electric motors | $1,251 | $4,556 |
$1,251
4,708
kWh
|
- | - | |
05 | 2.4221: Install compressor air intakes in coolest locations | $854 | $658 |
$854
3,217
kWh
|
- | - | |
06 | 2.6127: Maintain air filters by cleaning or replacement | $5,992 | $2,536 |
$5,986
22,531
kWh
|
$6
-
kW-mo/yr
|
- | |
TOTAL RECOMMENDED | $34,030 | $14,325 |
$33,754
127,064
kWh
|
$6
-
kW-mo/yr
|
$270 | ||
TOTAL IMPLEMENTED | $8,210 | $3,498 |
$8,204
30,890
kWh
|
$6
-
kW-mo/yr
|
- | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Electricity Fees Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs