| Assessment Year | 2009 |
|---|---|
| Principal Product | Labels for Wine and Spirits |
| NAICS | 323111: Commercial Printing (except Screen and Books) |
| SIC | 2752: Commercial Printing, Lithographic |
| Sales Range | $10 M to 50M |
| # of Employees | 94 |
| Plant Area |
60,000
ft2
|
| Annual Production | 1,400,000,000
pieces
|
| Production Hrs. Annual | 6,240
hrs
|
| Location (State) | California |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $289,131 | 3,386,198 |
kWh
|
$0.085 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $41,941 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $8,310 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings |
|---|---|---|---|---|---|---|
| 01 | 2.2135: Repair and eliminate steam leaks | $1,103 | - |
$1,103
17,131
kWh
|
- | |
| 02 | 2.7221: Lower temperature during the winter season and vice-versa | $3,700 | $3,605 |
$3,700
43,321
kWh
|
- | |
| 03 | 2.7135: Install occupancy sensors | $1,227 | $1,320 | - |
$1,227
-
kW-mo/yr
|
|
| 04 | 2.4133: Use most efficient type of electric motors | $335 | $553 |
$335
3,926
kWh
|
- | |
| 05 | 2.4231: Reduce the pressure of compressed air to the minimum required | $765 | $1,569 |
$765
8,864
kWh
|
- | |
| 06 | 2.6231: Utilize controls to operate equipment only when needed | $402 | $906 |
$402
4,710
kWh
|
- | |
| 07 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $1,543 | $12,880 |
$1,543
18,064
kWh
|
- | |
| 08 | 2.9114: Use solar heat to make electricty | $32,866 | $534,450 |
$32,866
384,800
kWh
|
- | |
| TOTAL RECOMMENDED | $41,941 | $555,283 |
$40,714
480,816
kWh
|
$1,227
-
kW-mo/yr
|
||
| TOTAL IMPLEMENTED | $8,310 | $19,264 |
$7,083
87,152
kWh
|
$1,227
-
kW-mo/yr
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs