| Assessment Year | 2024 |
|---|---|
| Principal Product | Electronic Cable Connectors |
| NAICS | 334417: Electronic Connector Manufacturing |
| SIC | 3678: Electronic Connectors |
| Sales Range | $10 M to 50M |
| # of Employees | 112 |
| Plant Area |
33,000
ft2
|
| Annual Production | 20,000
units
|
| Production Hrs. Annual | 4,896
hrs
|
| Location (State) | California |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | ||
|---|---|---|---|---|---|
| Electricity Usage | $203,151 | 512,790 |
kWh
|
$0.40 | |
| Electricity Demand | $60,779 | 1,131 |
kW-mo/yr
|
$53.72 | |
| Natural Gas | $13,086 | 593 |
MMBtu
|
$22.08 | |
| Waste Disposal Costs | |||||
| Water Disposal | $48,000 | 9,000 |
Tgal
|
$5.33 | |
| TOTAL YEARLY COSTS | $325,016 | ||||
| RECOMMENDED SAVINGS* | $242,854 |
See individual recommendations below
*Non-energy impacts included in savings.
|
|||
| IMPLEMENTED SAVINGS* | - | ||||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Water Disposal Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $13,203 | $18,032 |
$8,308
20,970
kWh
|
$4,895
-
kW-mo/yr
|
- | |
| 02 | 2.9114: Use solar heat to make electricty | $49,836 | $74,485 |
$31,657
79,901
kWh
|
$18,179
-
kW-mo/yr
|
- | |
| 03 | 2.3141: Use battery storage for demand control | $54,943 | $3,087 |
$(-9,359.0)
(-23,625)
kWh
|
$64,302
-
kW-mo/yr
|
- | |
| 04 | 2.4223: Install direct acting units in place of compressed air pressure system in safety system | $54,151 | $15,130 |
$54,151
136,677
kWh
|
- | - | |
| 05 | 2.2223: Enhance sensitivity of temperature control and cutoff | $2,144 | $2,200 |
$1,755
4,430
kWh
|
$389
-
kW-mo/yr
|
- | |
| 06 | 2.4146: Use adjustable frequency drive or multiple speed motors on existing system | $10,164 | $2,109 |
$7,423
18,737
kWh
|
$2,741
-
kW-mo/yr
|
- | |
| 07 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $1,422 | $2,040 |
$1,082
2,731
kWh
|
$340
-
kW-mo/yr
|
- | |
| 08 | 2.4231: Reduce the pressure of compressed air to the minimum required | $3,188 | $500 |
$3,188
8,046
kWh
|
- | - | |
| 09 | 3.8113: Prevent excessive solvent usage (operator training) | $35,678 | $51,900 | - | - |
$35,678
-
Tgal
|
|
| 10 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $3,299 | $3,896 |
$2,237
5,646
kWh
|
$1,062
-
kW-mo/yr
|
- | |
| 11 | 2.4146: Use adjustable frequency drive or multiple speed motors on existing system | $5,784 | $2,109 |
$4,341
10,957
kWh
|
$1,443
-
kW-mo/yr
|
- | |
| 12 | 2.4146: Use adjustable frequency drive or multiple speed motors on existing system | $9,042 | $11,447 |
$6,830
17,240
kWh
|
$2,212
-
kW-mo/yr
|
- | |
| TOTAL RECOMMENDED | $242,854 | $186,935 |
$111,613
281,710
kWh
|
$95,563
-
kW-mo/yr
|
$35,678
-
Tgal
|
||
| TOTAL IMPLEMENTED | - | - | - | - | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Water Disposal Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs