| Assessment Year | 1995 |
|---|---|
| Principal Product | Injection Molded Plastic Parts |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $5 M to 10M |
| # of Employees | 100 |
| Plant Area |
58,600
ft2
|
| Annual Production | 600,000
lb
|
| Production Hrs. Annual | 8,736
hrs
|
| Location (State) | California |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $232,028 | 2,331,770 |
kWh
|
$0.100 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $42,694 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $42,347 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings |
|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $3,287 | $3,750 |
$3,287
46,014
kWh
|
|
| 02 | 2.2511: Insulate bare equipment | $894 | $1,000 |
$894
12,603
kWh
|
|
| 03 | 2.7261: Install timers and/or thermostats | $347 | $194 |
$347
5,569
kWh
|
|
| 04 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $14,842 | $19,362 |
$14,842
204,572
kWh
|
|
| 05 | 2.7144: Install spectral reflectors / delamp | $21,950 | $18,210 |
$21,950
302,462
kWh
|
|
| 06 | 2.7135: Install occupancy sensors | $1,374 | $1,502 |
$1,374
17,585
kWh
|
|
| TOTAL RECOMMENDED | $42,694 | $44,018 |
$42,694
588,805
kWh
|
||
| TOTAL IMPLEMENTED | $42,347 | $43,824 |
$42,347
583,236
kWh
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs