Assessment Year | 1993 |
---|---|
Principal Product | SMALL ARMS AMMUNITION |
NAICS |
n/a
|
SIC | 3482: Small Arms Ammunition |
Sales Range | $10 M to 50M |
# of Employees | 270 |
Plant Area |
n/a
|
Annual Production | 1,500,000
lb
|
Production Hrs. Annual | 4,200
hrs
|
Location (State) | California |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $859,127 | 8,747,362 |
kWh
|
$0.098 |
Natural Gas | $110,387 | 25,111 |
MMBtu
|
$4.40 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $65,155 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $53,323 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
---|---|---|---|---|---|---|---|
01 | 2.4133: Use most efficient type of electric motors | $3,157 | $3,130 |
$3,157
32,239
kWh
|
- | - | |
02 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $34,190 | $440 |
$34,190
327,667
kWh
|
- | - | |
03 | 2.2511: Insulate bare equipment | $4,096 | $7,642 | - |
$4,096
-
MMBtu
|
- | |
04 | 2.2425: Use flue gases to heat process or service water | $6,910 | $12,725 |
$6,910
70,340
kWh
|
- | - | |
05 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $2,930 | - |
$3,167
32,239
kWh
|
- | $(-237.0) | |
06 | 2.7144: Install spectral reflectors / delamp | $7,440 | $9,720 |
$6,428
65,651
kWh
|
- | $1,012 | |
07 | 2.6232: Install set-back timers | $4,573 | $4,480 |
$4,125
41,911
kWh
|
- | $448 | |
08 | 2.6232: Install set-back timers | $826 | $230 |
$651
6,741
kWh
|
- | $175 | |
09 | 2.6232: Install set-back timers | $1,033 | - |
$1,033
10,551
kWh
|
- | - | |
TOTAL RECOMMENDED | $65,155 | $38,367 |
$59,661
587,339
kWh
|
$4,096
-
MMBtu
|
$1,398 | ||
TOTAL IMPLEMENTED | $53,323 | $17,770 |
$52,100
510,258
kWh
|
- | $1,223 | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs