| Assessment Year | 1992 |
|---|---|
| Principal Product | ELECTRIC INSTRUMENTS |
| NAICS |
n/a
|
| SIC | 3825: Instruments for Measuring and Testing of Electricity and Electrical Signals |
| Sales Range | $10 M to 50M |
| # of Employees | 150 |
| Plant Area |
n/a
|
| Annual Production | 6,500
pieces
|
| Production Hrs. Annual | 3,360
hrs
|
| Location (State) | California |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $98,782 | 985,053 |
kWh
|
$0.10 |
| Natural Gas | $407 | 54 |
MMBtu
|
$7.54 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $11,327 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $102 | $78 |
$102
1,172
kWh
|
- | - | |
| 02 | 2.1311: Replace electrically-operated equipment with fossil fuel equipment | $3,916 | $1,632 |
$5,598
65,651
kWh
|
$(-1,682.0)
-
MMBtu
|
- | |
| 03 | 2.4231: Reduce the pressure of compressed air to the minimum required | $294 | $100 |
$294
2,931
kWh
|
- | - | |
| 04 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $176 | $100 |
$176
1,758
kWh
|
- | - | |
| 05 | 2.6232: Install set-back timers | $3,655 | $11,550 |
$3,277
32,825
kWh
|
- | $378 | |
| 06 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $791 | $666 |
$518
5,275
kWh
|
- | $273 | |
| 07 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $2,393 | - |
$685
6,741
kWh
|
- | $1,708 | |
| TOTAL RECOMMENDED | $11,327 | $14,126 |
$10,650
116,353
kWh
|
$(-1,682.0)
-
MMBtu
|
$2,359 | ||
| TOTAL IMPLEMENTED | - | - | - | - | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs