| Assessment Year | 2012 |
|---|---|
| Principal Product | Plastic Jugs |
| NAICS | 326160: Plastics Bottle Manufacturing |
| SIC | 3085: Plastics Bottles |
| Sales Range | $10 M to 50M |
| # of Employees | 30 |
| Plant Area |
14,000
ft2
|
| Annual Production | 5,500,000
pieces
|
| Production Hrs. Annual | 7,900
hrs
|
| Location (State) | Washington |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $200,191 | 4,742,880 |
kWh
|
$0.042 |
| Electricity Demand | $65,297 | 9,645 |
kW-mo/yr
|
$6.77 |
| Electricity Fees | $16,925 | - |
|
- |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $45,295 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $32,675 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Ancillary Material Cost Savings |
|---|---|---|---|---|---|---|---|
| 01 | 3.7121: Improve handling practices | $7,884 | $60 | - | - | $7,884 | |
| 02 | 2.2626: Avoid frost formation on evaporators | $8,968 | - |
$6,943
160,633
kWh
|
$2,025
-
kW-mo/yr
|
- | |
| 03 | 2.2621: Modify refrigeration system to operate at a lower pressure | $3,021 | $10,000 |
$3,021
69,909
kWh
|
- | - | |
| 04 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $7,053 | $8,053 |
$5,519
127,704
kWh
|
$1,534
-
kW-mo/yr
|
- | |
| 05 | 2.4224: Upgrade controls on compressors | $17,738 | $17,500 |
$15,127
350,011
kWh
|
$2,611
-
kW-mo/yr
|
- | |
| 06 | 2.7121: Utilize daylight whenever possible in lieu of artificial light | $631 | $4,131 |
$631
14,597
kWh
|
- | - | |
| TOTAL RECOMMENDED | $45,295 | $39,744 |
$31,241
722,854
kWh
|
$6,170
-
kW-mo/yr
|
$7,884 | ||
| TOTAL IMPLEMENTED | $32,675 | $25,613 |
$20,646
477,715
kWh
|
$4,145
-
kW-mo/yr
|
$7,884 | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Ancillary Material Cost Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs