| Assessment Year | 2012 |
|---|---|
| Principal Product | Dimensional Lumber |
| NAICS | 321113: Sawmills |
| SIC | 2421: Sawmills and Planing Mills, General |
| Sales Range | $10 M to 50M |
| # of Employees | 80 |
| Plant Area |
165,417
ft2
|
| Annual Production | 100,000
units
|
| Production Hrs. Annual | 8,760
hrs
|
| Location (State) | Oregon |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $675,041 | 15,372,000 |
kWh
|
$0.044 |
| Electricity Demand | $232,984 | 43,794 |
kW-mo/yr
|
$5.32 |
| Natural Gas | $1,021,383 | 193,126 |
MMBtu
|
$5.29 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $59,529 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $49,625 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.4226: Use / purchase optimum sized compressor | $25,558 | $7,571 |
$25,558
558,640
kWh
|
- | - | |
| 02 | 2.2136: Install / repair insulation on steam lines | $2,191 | $1,404 | - | - |
$2,191
-
MMBtu
|
|
| 03 | 2.4131: Size electric motors for peak operating efficiency | $7,720 | $8,890 |
$7,720
168,735
kWh
|
- | - | |
| 04 | 2.4322: Use or replace with energy efficient substitutes | $9,839 | $17,100 |
$7,653
167,274
kWh
|
$2,186
-
kW-mo/yr
|
- | |
| 05 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $2,184 | $4,750 |
$1,576
34,438
kWh
|
$609
-
kW-mo/yr
|
- | |
| 06 | 2.6126: Keep solid fuels / raw materials dry | $12,037 | $50,000 | - | - |
$12,037
-
MMBtu
|
|
| TOTAL RECOMMENDED | $59,529 | $89,715 |
$42,506
929,086
kWh
|
$2,795
-
kW-mo/yr
|
$14,228
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $49,625 | $76,075 |
$33,211
725,913
kWh
|
$2,186
-
kW-mo/yr
|
$14,228
-
MMBtu
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs