| Assessment Year | 2007 |
|---|---|
| Principal Product | dimensional lumber |
| NAICS | 333243: Sawmill, Woodworking, and Paper Machinery Manufacturing |
| SIC | 2421: Sawmills and Planing Mills, General |
| Sales Range | $1 M to 5M |
| # of Employees | 31 |
| Plant Area |
35,000
ft2
|
| Annual Production | 45,000
thousand feet
|
| Production Hrs. Annual | 2,205
hrs
|
| Location (State) | Idaho |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $135,700 | 3,457,000 |
kWh
|
$0.039 |
| Electricity Demand | $15,400 | 87,700 |
kW-mo/yr
|
$0.18 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $524,200 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $507,600 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Fees Savings | Increase in Production Savings |
|---|---|---|---|---|---|---|---|
| 01 | 4.122: Develop standard procedures to improve internal yields | $489,500 | $250,000 | - | - | $489,500 | |
| 02 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $2,300 | $3,500 |
$2,300
45,000
kWh
|
- | - | |
| 03 | 2.4224: Upgrade controls on compressors | $13,700 | $35,000 |
$13,700
302,000
kWh
|
- | - | |
| 04 | 2.4239: Eliminate or reduce compressed air usage | $2,100 | - |
$2,100
32,000
kWh
|
- | - | |
| 05 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $1,000 | - |
$1,000
9,740
kWh
|
- | - | |
| 06 | 2.7124: Make a practice of turning off lights when not needed | $1,800 | $1,300 |
$1,800
45,990
kWh
|
- | - | |
| 07 | 2.3212: Optimize plant power factor | $13,800 | $19,200 | - | $13,800 | - | |
| TOTAL RECOMMENDED | $524,200 | $309,000 |
$20,900
434,730
kWh
|
$13,800 | $489,500 | ||
| TOTAL IMPLEMENTED | $507,600 | $288,500 |
$18,100
379,000
kWh
|
- | $489,500 | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Fees Savings | Increase in Production Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs