Assessment Year | 2004 |
---|---|
Principal Product | Lumber |
NAICS | 321912: Cut Stock, Resawing Lumber, and Planing |
SIC | 2421: Sawmills and Planing Mills, General |
Sales Range | $10 M to 50M |
# of Employees | 15 |
Plant Area |
350,000
ft2
|
Annual Production | 64,990,000
thousand feet
|
Production Hrs. Annual | 2,783
hrs
|
Location (State) | Idaho |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $161,180 | 3,209,470 |
kWh
|
$0.050 |
Electricity Demand | $34,710 | 146,880 |
kW-mo/yr
|
$0.24 |
Electricity Fees | $2,282 | - |
|
- |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $94,055 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $54,650 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Personnel Changes Savings | Primary Product Savings |
---|---|---|---|---|---|---|---|---|
01 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $1,350 | $1,350 |
$1,150
23,000
kWh
|
$200
-
kW-mo/yr
|
- | - | |
02 | 2.4224: Upgrade controls on compressors | $5,200 | - |
$4,470
89,000
kWh
|
$730
-
kW-mo/yr
|
- | - | |
03 | 4.441: Install automatic packing equipment | $35,405 | $42,000 |
$(-123.0)
(-3,530)
kWh
|
$(-272.0)
-
kW-mo/yr
|
$35,800 | - | |
04 | 4.651: Install back-up equipment | $44,800 | $170 | - | - | $16,900 | $27,900 | |
05 | 2.4133: Use most efficient type of electric motors | $3,300 | $6,900 |
$2,700
52,900
kWh
|
$600
-
kW-mo/yr
|
- | - | |
06 | 2.7124: Make a practice of turning off lights when not needed | $4,000 | $800 |
$4,000
79,820
kWh
|
- | - | - | |
TOTAL RECOMMENDED | $94,055 | $51,220 |
$12,197
241,190
kWh
|
$1,258
-
kW-mo/yr
|
$52,700 | $27,900 | ||
TOTAL IMPLEMENTED | $54,650 | $8,420 |
$8,320
164,900
kWh
|
$1,530
-
kW-mo/yr
|
$16,900 | $27,900 | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Personnel Changes Savings | Primary Product Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs