Assessment Year | 1994 |
---|---|
Principal Product | Phenolic Resins |
NAICS |
n/a
|
SIC | 2821: Plastics Materials, Synthetic Resins, and Nonvulcanizable Elastomers |
Sales Range | $10 M to 50M |
# of Employees | 23 |
Plant Area |
n/a
|
Annual Production | 120
lb
|
Production Hrs. Annual | 8,760
hrs
|
Location (State) | Oregon |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $185,129 | 4,067,995 |
kWh
|
$0.046 |
Natural Gas | $99,568 | 35,829 |
MMBtu
|
$2.78 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $76,640 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $25,918 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
---|---|---|---|---|---|---|---|
01 | 2.1232: Keep boiler tubes clean | $4,250 | $1,000 | - |
$4,250
-
MMBtu
|
- | |
02 | 2.2437: Recover waste heat from equipment | $2,050 | $2,746 | - |
$2,050
-
MMBtu
|
- | |
03 | 2.7134: Use photocell controls | $5,147 | $1,105 |
$5,147
109,613
kWh
|
- | - | |
04 | 2.3137: Use power during off-peak periods | $42,700 | $3,000 |
$42,700
-
kWh
|
- | - | |
05 | 2.6232: Install set-back timers | $1,675 | $600 |
$1,675
67,116
kWh
|
- | - | |
06 | 2.4133: Use most efficient type of electric motors | $373 | $825 |
$373
8,792
kWh
|
- | - | |
07 | 2.3212: Optimize plant power factor | $4,297 | $4,400 |
$4,297
-
kWh
|
- | - | |
08 | 2.8114: Change rate schedules or other changes in utility service | $16,148 | $43,000 | - | - | $16,148 | |
TOTAL RECOMMENDED | $76,640 | $56,676 |
$54,192
185,521
kWh
|
$6,300
-
MMBtu
|
$16,148 | ||
TOTAL IMPLEMENTED | $25,918 | $45,930 |
$5,520
118,405
kWh
|
$4,250
-
MMBtu
|
$16,148 | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs