| Assessment Year | 1992 |
|---|---|
| Principal Product | DIMENSIONAL LUMBER |
| NAICS |
n/a
|
| SIC | 2421: Sawmills and Planing Mills, General |
| Sales Range | $10 M to 50M |
| # of Employees | 115 |
| Plant Area |
n/a
|
| Annual Production | 65,000
thousand feet
|
| Production Hrs. Annual | 2,000
hrs
|
| Location (State) | Oregon |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $1,132,628 | 27,406,800 |
kWh
|
$0.041 |
| Wood | $601,425 | 7,993,021 |
MMBtu
|
$0.075 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $156,380 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $44,472 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|
| 01 | 2.7111: Reduce illumination to minimum necessary levels | $993 | $711 |
$848
17,878
kWh
|
$145 | |
| 02 | 2.6232: Install set-back timers | $26,976 | $20,752 |
$21,981
594,080
kWh
|
$4,995 | |
| 03 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $15,045 | $17,766 |
$12,488
264,068
kWh
|
$2,557 | |
| 04 | 2.3411: Replace electric motors with back pressure steam turbines and use exhaust steam for process heat | $27,941 | $49,500 |
$27,941
804,220
kWh
|
- | |
| 05 | 2.4133: Use most efficient type of electric motors | $1,458 | $2,813 |
$1,458
31,946
kWh
|
- | |
| 06 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $83,967 | $300,000 |
$83,967
1,823,857
kWh
|
- | |
| TOTAL RECOMMENDED | $156,380 | $391,542 |
$148,683
3,536,049
kWh
|
$7,697 | ||
| TOTAL IMPLEMENTED | $44,472 | $42,042 |
$36,775
907,972
kWh
|
$7,697 | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Administrative Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs