ITAC Assessment: OR0053
ITAC logo
ITAC Assessment: OR0053
Grant Funding Opportunity NOW OPEN
Up to $300k at 50% cost share for qualifying* projects.
Grant Funding Opportunity Open
Qualifying* small and medium-sized US manufacturers, that received an ITAC, Onsite Energy/CHP TAP, or qualified equivalent assessment since 2018 can now apply for grants for implementation of assessment recommendations at up to 50% of qualifying* project costs with a maximum of $300,000 per grant.
IMPORTANT: The grant program now operates on a rolling basis and applications may be submitted at any time through the year, with quarterly reviews.
*See Full Grant Solicitation for full qualification and selection details.
Assessment Year 1989
Principal Product DIMENSIONAL LUMBER
NAICS
n/a
SIC 2421: Sawmills and Planing Mills, General
Sales Range $10
M
to 50
M
# of Employees 70
Plant Area
n/a
Annual Production 54,000
thousand feet
Production Hrs. Annual 4,590
hrs
Location (State) Oregon

Facility Energy Cost and Usage

Source Yearly Cost Usage
Electricity Usage $188,371 4,235,053
kWh
TOTAL YEARLY COSTS -
RECOMMENDED SAVINGS* $17,735 *Non-energy impacts included in savings.
IMPLEMENTED SAVINGS* $14,458

Recommendations

# Description Yearly Savings* Imp'd Cost* Status Electricity Usage Savings Administrative Changes Savings
01 2.6232: Install set-back timers $975 $300 $767
22,567
kWh
$208
02 2.6232: Install set-back timers $499 $180 $404
9,086
kWh
$95
03 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves $7,482 $3,000 $7,482
169,988
kWh
-
04 2.7142: Utilize higher efficiency lamps and/or ballasts $2,237 $2,200 $2,402
70,633
kWh
$(-165.0)
05 2.4133: Use most efficient type of electric motors $65 $80 $65
1,465
kWh
-
06 2.3212: Optimize plant power factor $6,477 $13,650 $6,477
-
kWh
-
TOTAL RECOMMENDED $17,735 $19,410 $17,597
273,739
kWh
$138
TOTAL IMPLEMENTED $14,458 $16,830 $14,363
179,074
kWh
$95
Yearly Savings* Imp'd Cost* Electricity Usage Savings Administrative Changes Savings
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs