Assessment Year | 1987 |
---|---|
Principal Product | PLYWOOD VENEER |
NAICS |
n/a
|
SIC | 2435: Hardwood Veneer and Plywood |
Sales Range | $10 M to 50M |
# of Employees | 50 |
Plant Area |
n/a
|
Annual Production | 60,000,000
pieces
|
Production Hrs. Annual | 7,488
hrs
|
Location (State) | Oregon |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $235,816 | 4,682,884 |
kWh
|
$0.050 |
Natural Gas | $506,123 | 120,020 |
MMBtu
|
$4.22 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $9,622 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $3,477 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
---|---|---|---|---|---|---|
01 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $2,078 | - |
$2,078
41,618
kWh
|
- | |
02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $1,607 | $42 |
$1,607
32,239
kWh
|
- | |
03 | 2.1213: Direct warmest air to combustion intake | $825 | $500 | - |
$825
-
MMBtu
|
|
04 | 2.4221: Install compressor air intakes in coolest locations | $655 | $500 |
$655
13,189
kWh
|
- | |
05 | 2.2136: Install / repair insulation on steam lines | $1,436 | $965 | - |
$1,436
-
MMBtu
|
|
06 | 2.4133: Use most efficient type of electric motors | $744 | $704 |
$744
14,947
kWh
|
- | |
07 | 2.2414: Use waste heat from hot flue gases to preheat | $1,137 | $2,275 | - |
$1,137
-
MMBtu
|
|
08 | 2.3212: Optimize plant power factor | $1,140 | $2,370 |
$1,140
-
kWh
|
- | |
TOTAL RECOMMENDED | $9,622 | $7,356 |
$6,224
101,993
kWh
|
$3,398
-
MMBtu
|
||
TOTAL IMPLEMENTED | $3,477 | $1,204 |
$3,477
69,754
kWh
|
- | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs