| Assessment Year | 1996 |
|---|---|
| Principal Product | Computer Diskettes |
| NAICS |
n/a
|
| SIC | 3695: Magnetic And Optical Recording Media |
| Sales Range | $10 M to 50M |
| # of Employees | 600 |
| Plant Area |
850,000
ft2
|
| Annual Production | 0
units
|
| Production Hrs. Annual | 8,760
hrs
|
| Location (State) | Oklahoma |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $784,293 | 21,563,599 |
kWh
|
$0.036 |
| Natural Gas | $134,891 | 68,710 |
MMBtu
|
$1.96 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $370,138 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $21,082 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Other Liquid (haz) Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.4224: Upgrade controls on compressors | $7,290 | $2,800 |
$7,290
247,069
kWh
|
- | - | |
| 02 | 2.1233: Analyze flue gas for proper air/fuel ratio | $10,133 | - | - |
$10,133
-
MMBtu
|
- | |
| 03 | 2.2163: Use minimum steam operating pressure | $3,659 | - | - |
$3,659
-
MMBtu
|
- | |
| 04 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $816 | $2,570 |
$816
18,757
kWh
|
- | - | |
| 05 | 2.4146: Use adjustable frequency drive or multiple speed motors on existing system | $1,117 | $1,957 |
$1,117
25,498
kWh
|
- | - | |
| 06 | 2.4146: Use adjustable frequency drive or multiple speed motors on existing system | $6,678 | $10,815 |
$6,678
152,696
kWh
|
- | - | |
| 07 | 3.8142: Distill contaminated solvents for reuse | $340,445 | $198,500 | - | - |
$340,445
-
gal
|
|
| TOTAL RECOMMENDED | $370,138 | $216,642 |
$15,901
444,020
kWh
|
$13,792
-
MMBtu
|
$340,445
-
gal
|
||
| TOTAL IMPLEMENTED | $21,082 | $2,800 |
$7,290
247,069
kWh
|
$13,792
-
MMBtu
|
- | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Other Liquid (haz) Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs