Assessment Year | 1993 |
---|---|
Principal Product | Lenses, Semiconductor Material |
NAICS |
n/a
|
SIC | 3339: Primary Smelting and Refining of Nonferrous Metals, Except Copper and Aluminum |
Sales Range | $10 M to 50M |
# of Employees | 107 |
Plant Area |
36,095
ft2
|
Annual Production | 24,000
pieces
|
Production Hrs. Annual | 8,568
hrs
|
Location (State) | Oklahoma |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $193,453 | 5,402,696 |
kWh
|
$0.036 |
Natural Gas | $39,163 | 10,472 |
MMBtu
|
$3.74 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $44,955 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $11,098 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
---|---|---|---|---|---|---|
01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $2,436 | $648 |
$2,436
67,116
kWh
|
- | |
02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $7,229 | $12,281 |
$7,229
143,611
kWh
|
- | |
03 | 2.6231: Utilize controls to operate equipment only when needed | $1,081 | $69 |
$1,081
42,497
kWh
|
- | |
04 | 2.4146: Use adjustable frequency drive or multiple speed motors on existing system | $4,239 | $11,720 |
$4,239
140,973
kWh
|
- | |
05 | 2.2122: Install / repair insulation on condensate lines | $352 | $168 | - |
$352
-
MMBtu
|
|
06 | 2.1121: Use insulation in furnaces to facilitate heating / cooling | $21,033 | $8,169 |
$21,033
824,736
kWh
|
- | |
07 | 2.2692: Use outside cold water source as a supply of cooling water | $8,585 | $31,250 |
$8,585
(-9,379)
kWh
|
- | |
TOTAL RECOMMENDED | $44,955 | $64,305 |
$44,603
1,209,554
kWh
|
$352
-
MMBtu
|
||
TOTAL IMPLEMENTED | $11,098 | $13,166 |
$10,746
253,224
kWh
|
$352
-
MMBtu
|
||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs