| Assessment Year | 1989 |
|---|---|
| Principal Product | FIXTURES, DIES & MOLDS |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $1 M to 5M |
| # of Employees | 70 |
| Plant Area |
n/a
|
| Annual Production | 150
pieces
|
| Production Hrs. Annual | 2,600
hrs
|
| Location (State) | Kansas |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $70,496 | 830,012 |
kWh
|
$0.085 |
| Natural Gas | $3,265 | 726 |
MMBtu
|
$4.50 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $5,005 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $3,056 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.7261: Install timers and/or thermostats | $1,539 | $1,080 | - |
$1,539
-
MMBtu
|
|
| 02 | 2.2437: Recover waste heat from equipment | $1,374 | $1,890 |
$(-59.0)
(-879)
kWh
|
$1,433
-
MMBtu
|
|
| 03 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $1,517 | $334 |
$1,517
14,361
kWh
|
- | |
| 04 | 2.4146: Use adjustable frequency drive or multiple speed motors on existing system | $575 | $2,279 |
$575
7,913
kWh
|
- | |
| TOTAL RECOMMENDED | $5,005 | $5,583 |
$2,033
21,395
kWh
|
$2,972
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $3,056 | $1,414 |
$1,517
14,361
kWh
|
$1,539
-
MMBtu
|
||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs