| Assessment Year | 1985 |
|---|---|
| Principal Product | FLOUR & MILL FEED |
| NAICS |
n/a
|
| SIC | 2041: Flour and Other Grain Mill Products |
| Sales Range | $50 M to 100M |
| # of Employees | 60 |
| Plant Area |
n/a
|
| Annual Production | 43,000,000
lb
|
| Production Hrs. Annual | 7,680
hrs
|
| Location (State) | Oklahoma |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $779,800 | 18,825,030 |
kWh
|
$0.041 |
| Natural Gas | $27,888 | 7,525 |
MMBtu
|
$3.71 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $20,925 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $16,499 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $1,611 | $1,080 |
$1,611
48,945
kWh
|
- | - | |
| 02 | 2.4133: Use most efficient type of electric motors | $594 | $559 |
$594
15,240
kWh
|
- | - | |
| 03 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $14,014 | $1,950 |
$14,014
366,647
kWh
|
- | - | |
| 04 | 2.6232: Install set-back timers | $493 | $250 |
$493
10,551
kWh
|
- | - | |
| 05 | 2.7111: Reduce illumination to minimum necessary levels | $505 | - |
$505
13,189
kWh
|
- | - | |
| 06 | 2.7261: Install timers and/or thermostats | $280 | $165 | - |
$280
-
MMBtu
|
- | |
| 07 | 2.2444: Use hot process fluids to preheat incoming process fluids | $3,428 | $625 | - |
$2,468
-
MMBtu
|
$960 | |
| TOTAL RECOMMENDED | $20,925 | $4,629 |
$17,217
454,572
kWh
|
$2,748
-
MMBtu
|
$960 | ||
| TOTAL IMPLEMENTED | $16,499 | $3,754 |
$16,219
430,832
kWh
|
$280
-
MMBtu
|
- | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs