Assessment Year | 1998 |
---|---|
Principal Product | Plastic Foam Products |
NAICS |
n/a
|
SIC | 3086: Plastics Foam Products |
Sales Range | $1 M to 5M |
# of Employees | 18 |
Plant Area |
40,000
ft2
|
Annual Production | 25,000,000
units
|
Production Hrs. Annual | 5,473
hrs
|
Location (State) | Nevada |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $7,127 | 169,109 |
kWh
|
$0.042 |
Electricity Demand | $7,981 | 860 |
kW-mo/yr
|
$9.28 |
Electricity Fees | $914 | - |
|
- |
Natural Gas | $26,375 | 5,082 |
MMBtu
|
$5.19 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $68,776 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $17,094 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Fees Savings | Natural Gas Savings | Administrative Changes Savings | Primary Product Savings |
---|---|---|---|---|---|---|---|---|---|
01 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $166 | $200 |
$163
3,810
kWh
|
$3 | - | - | - | |
02 | 2.4221: Install compressor air intakes in coolest locations | $87 | $74 |
$85
2,052
kWh
|
$2 | - | - | - | |
03 | 2.4231: Reduce the pressure of compressed air to the minimum required | $234 | $50 |
$229
5,569
kWh
|
$5 | - | - | - | |
04 | 2.1133: Adjust burners for efficient operation | $341 | $600 | - | - |
$341
-
MMBtu
|
- | - | |
05 | 2.2511: Insulate bare equipment | $337 | $255 | - | - |
$337
-
MMBtu
|
- | - | |
06 | 4.211: Consider use / purchase of bulk materials where possible | $51,111 | $60,000 | - | - | - | - | $51,111 | |
07 | 4.321: Optimize production lot sizes and inventories | $16,500 | $66,275 | - | - | - | $16,500 | - | |
TOTAL RECOMMENDED | $68,776 | $127,454 |
$477
11,431
kWh
|
$10 |
$678
-
MMBtu
|
$16,500 | $51,111 | ||
TOTAL IMPLEMENTED | $17,094 | $67,149 |
$248
5,862
kWh
|
$5 |
$341
-
MMBtu
|
$16,500 | - | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Fees Savings | Natural Gas Savings | Administrative Changes Savings | Primary Product Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs