| Assessment Year | 1995 |
|---|---|
| Principal Product | Wood Mouldings |
| NAICS |
n/a
|
| SIC | 2421: Sawmills and Planing Mills, General |
| Sales Range | $10 M to 50M |
| # of Employees | 74 |
| Plant Area |
60,500
ft2
|
| Annual Production | 18,000,000
units
|
| Production Hrs. Annual | 4,550
hrs
|
| Location (State) | California |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $190,914 | 2,606,389 |
kWh
|
$0.073 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $6,380 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $5,013 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings |
|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $2,185 | $1,514 |
$2,185
32,239
kWh
|
|
| 02 | 2.6212: Turn off equipment during breaks, reduce operating time | $852 | - |
$852
16,120
kWh
|
|
| 03 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $1,310 | $550 |
$1,310
24,912
kWh
|
|
| 04 | 2.4221: Install compressor air intakes in coolest locations | $159 | $110 |
$159
2,931
kWh
|
|
| 05 | 2.7135: Install occupancy sensors | $324 | $491 |
$324
6,155
kWh
|
|
| 06 | 2.3212: Optimize plant power factor | $884 | $7,500 |
$884
-
kWh
|
|
| 07 | 2.7121: Utilize daylight whenever possible in lieu of artificial light | $666 | - |
$666
12,603
kWh
|
|
| TOTAL RECOMMENDED | $6,380 | $10,165 |
$6,380
94,960
kWh
|
||
| TOTAL IMPLEMENTED | $5,013 | $2,064 |
$5,013
85,874
kWh
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs