| Assessment Year | 1995 |
|---|---|
| Principal Product | Iron Castings |
| NAICS |
n/a
|
| SIC | 3321: Gray and Ductile Iron Foundries |
| Sales Range | $5 M to 10M |
| # of Employees | 55 |
| Plant Area |
20,000
ft2
|
| Annual Production | 12,000,000
lb
|
| Production Hrs. Annual | 4,160
hrs
|
| Location (State) | Indiana |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $415,058 | 8,745,897 |
kWh
|
$0.047 |
| Natural Gas | $12,860 | 2,287 |
MMBtu
|
$5.62 |
| LPG | $17,366 | 1,920 |
MMBtu
|
$9.04 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $6,621 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $6,621 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings |
|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $4,328 | $7,375 |
$4,328
91,149
kWh
|
|
| 02 | 2.7124: Make a practice of turning off lights when not needed | $858 | - |
$858
18,171
kWh
|
|
| 03 | 2.4221: Install compressor air intakes in coolest locations | $445 | $1,200 |
$445
9,379
kWh
|
|
| 04 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $440 | $100 |
$440
9,379
kWh
|
|
| 05 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $250 | $200 |
$250
5,275
kWh
|
|
| 06 | 2.7135: Install occupancy sensors | $168 | $800 |
$168
3,517
kWh
|
|
| 07 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $111 | $390 |
$111
2,345
kWh
|
|
| 08 | 2.6218: Turn off equipment when not in use | $21 | - |
$21
586
kWh
|
|
| TOTAL RECOMMENDED | $6,621 | $10,065 |
$6,621
139,801
kWh
|
||
| TOTAL IMPLEMENTED | $6,621 | $10,065 |
$6,621
139,801
kWh
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs