| Assessment Year | 1992 |
|---|---|
| Principal Product | PVC AND ABS PIPE FITTING |
| NAICS |
n/a
|
| SIC | 3088: Plastics Plumbing Fixtures |
| Sales Range | $5 M to 10M |
| # of Employees | 70 |
| Plant Area |
n/a
|
| Annual Production | 6,500,000
lb
|
| Production Hrs. Annual | 8,400
hrs
|
| Location (State) | Michigan |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $190,568 | 4,052,755 |
kWh
|
$0.047 |
| Natural Gas | $12,680 | 3,089 |
MMBtu
|
$4.10 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $4,537 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $4,063 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $2,788 | $7,000 |
$2,788
59,203
kWh
|
- | |
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $474 | $654 |
$619
13,189
kWh
|
$(-145.0) | |
| 03 | 2.6232: Install set-back timers | $517 | $200 |
$517
11,137
kWh
|
- | |
| 04 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $758 | $500 |
$758
16,120
kWh
|
- | |
| TOTAL RECOMMENDED | $4,537 | $8,354 |
$4,682
99,649
kWh
|
$(-145.0) | ||
| TOTAL IMPLEMENTED | $4,063 | $7,700 |
$4,063
86,460
kWh
|
- | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs