| Assessment Year | 2024 |
|---|---|
| Principal Product | metal cans |
| NAICS | 332431: Metal Can Manufacturing |
| SIC | 3411: Metal Cans |
| Sales Range | $100 M to 500M |
| # of Employees | 112 |
| Plant Area |
414,000
ft2
|
| Annual Production | 1,231,711,104
pieces
|
| Production Hrs. Annual | 4,368
hrs
|
| Location (State) | Iowa |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | ||
|---|---|---|---|---|---|
| Electricity Usage | $1,232,879 | 31,813,600 |
kWh
|
$0.039 | |
| Electricity Demand | $1,206,380 | 52,999 |
kW-mo/yr
|
$22.76 | |
| Natural Gas | $742,452 | 322,266 |
MMBtu
|
$2.30 | |
| Waste Disposal Costs | |||||
| Water Usage | $152,879 | 69,092 |
Tgal
|
$2.21 | |
| Water Disposal | $249,435 | 69,092 |
Tgal
|
$3.61 | |
| TOTAL YEARLY COSTS | $3,584,025 | ||||
| RECOMMENDED SAVINGS* | $193,490 |
See individual recommendations below
*Non-energy impacts included in savings.
|
|||
| IMPLEMENTED SAVINGS* | - | ||||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Water Usage Savings | Water Disposal Savings |
|---|---|---|---|---|---|---|---|---|
| 01 | 3.4159: Replace treated water with well / surface water | $21,410 | $168,000 | - | - |
$11,785
-
Tgal
|
$9,625
-
Tgal
|
|
| 02 | 2.4231: Reduce the pressure of compressed air to the minimum required | $9,395 | $800 |
$3,609
92,542
kWh
|
$5,786
-
kW-mo/yr
|
- | - | |
| 03 | 2.4221: Install compressor air intakes in coolest locations | $3,674 | $14,000 |
$3,674
94,198
kWh
|
- | - | - | |
| 04 | 2.2622: Replace existing chiller with high efficiency model | $11,668 | $59,968 |
$3,884
99,591
kWh
|
$7,784
-
kW-mo/yr
|
- | - | |
| 05 | 2.9114: Use solar heat to make electricty | $147,343 | $2,297,063 |
$147,343
3,778,038
kWh
|
- | - | - | |
| TOTAL RECOMMENDED | $193,490 | $2,539,831 |
$158,510
4,064,369
kWh
|
$13,570
-
kW-mo/yr
|
$11,785
-
Tgal
|
$9,625
-
Tgal
|
||
| TOTAL IMPLEMENTED | - | - | - | - | - | - | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs