| Assessment Year | 2015 |
|---|---|
| Principal Product | wood and solid surface fabrications |
| NAICS | 321912: Cut Stock, Resawing Lumber, and Planing |
| SIC | 2426: Hardwood Dimension and Flooring Mills |
| Sales Range | $10 M to 50M |
| # of Employees | 110 |
| Plant Area |
74,000
ft2
|
| Annual Production | 3,000,000
pieces
|
| Production Hrs. Annual | 5,700
hrs
|
| Location (State) | Missouri |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $166,420 | 2,999,587 |
kWh
|
$0.055 |
| Electricity Demand | $50,519 | 6,315 |
kW-mo/yr
|
$8.00 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $38,880 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $27,945 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings |
|---|---|---|---|---|---|---|
| 01 | 2.6212: Turn off equipment during breaks, reduce operating time | $10,380 | - |
$10,380
187,097
kWh
|
- | |
| 02 | 2.4239: Eliminate or reduce compressed air usage | $10,163 | $10,500 |
$8,375
150,953
kWh
|
$1,788
-
kW-mo/yr
|
|
| 03 | 2.4221: Install compressor air intakes in coolest locations | $772 | $1,500 |
$592
10,678
kWh
|
$180
-
kW-mo/yr
|
|
| 04 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $4,237 | $900 |
$3,253
58,628
kWh
|
$984
-
kW-mo/yr
|
|
| 05 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $10,512 | $23,625 |
$8,064
145,350
kWh
|
$2,448
-
kW-mo/yr
|
|
| 06 | 2.2511: Insulate bare equipment | $2,816 | $3,700 |
$2,816
50,756
kWh
|
- | |
| TOTAL RECOMMENDED | $38,880 | $40,225 |
$33,480
603,462
kWh
|
$5,400
-
kW-mo/yr
|
||
| TOTAL IMPLEMENTED | $27,945 | $28,225 |
$24,513
441,831
kWh
|
$3,432
-
kW-mo/yr
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs