| Assessment Year | 2007 |
|---|---|
| Principal Product | PTE sheets |
| NAICS | 313320: Fabric Coating Mills |
| SIC | 3081: Unsupported Plastics Film and Sheet |
| Sales Range | $10 M to 50M |
| # of Employees | 40 |
| Plant Area |
47,500
ft2
|
| Annual Production | 500
ton
|
| Production Hrs. Annual | 8,000
hrs
|
| Location (State) | Missouri |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $374,700 | 6,729,000 |
kWh
|
$0.056 |
| Natural Gas | $19,720 | 12,246 |
MMBtu
|
$1.61 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $130,770 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings |
|---|---|---|---|---|---|
| 01 | 2.5112: Use continuous equipment which retains process heating conveyors within the heated chamber | $78,456 | $300,000 |
$78,456
1,056,931
kWh
|
|
| 02 | 2.4146: Use adjustable frequency drive or multiple speed motors on existing system | $51,740 | $80,000 |
$51,740
785,600
kWh
|
|
| 03 | 2.4221: Install compressor air intakes in coolest locations | $574 | $900 |
$574
6,793
kWh
|
|
| TOTAL RECOMMENDED | $130,770 | $380,900 |
$130,770
1,849,324
kWh
|
||
| TOTAL IMPLEMENTED | - | - | - | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs