| Assessment Year | 2008 |
|---|---|
| Principal Product | Air Conditioning Equipment |
| NAICS | 336390: Other Motor Vehicle Parts Manufacturing |
| SIC | 3585: Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment |
| Sales Range | $10 M to 50M |
| # of Employees | 300 |
| Plant Area |
100,000
ft2
|
| Annual Production | 3,000,000
pieces
|
| Production Hrs. Annual | 6,240
hrs
|
| Location (State) | Mississippi |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $400,809 | 6,114,600 |
kWh
|
$0.066 |
| Electricity Demand | $253,267 | 13,398 |
kW-mo/yr
|
$18.90 |
| Electricity Fees | $5,923 | - |
|
- |
| Natural Gas | $146,903 | 11,377 |
MMBtu
|
$12.91 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $22,181 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $22,181 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Electricity Fees Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $12,680 | $26,178 |
$8,234
183,961
kWh
|
$4,259
-
kW-mo/yr
|
$187 | |
| 02 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $4,013 | $266 |
$3,954
88,351
kWh
|
- | $59 | |
| 03 | 2.4221: Install compressor air intakes in coolest locations | $2,739 | $3,030 |
$1,448
32,340
kWh
|
$1,251
-
kW-mo/yr
|
$40 | |
| 04 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $2,492 | $8,771 |
$1,485
33,185
kWh
|
$970
-
kW-mo/yr
|
$37 | |
| 05 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $257 | $450 |
$133
2,980
kWh
|
$120
-
kW-mo/yr
|
$4 | |
| TOTAL RECOMMENDED | $22,181 | $38,695 |
$15,254
340,817
kWh
|
$6,600
-
kW-mo/yr
|
$327 | ||
| TOTAL IMPLEMENTED | $22,181 | $38,695 |
$15,254
340,817
kWh
|
$6,600
-
kW-mo/yr
|
$327 | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs