Assessment Year | 2007 |
---|---|
Principal Product | Wiring Harness Components |
NAICS | 334417: Electronic Connector Manufacturing |
SIC | 3678: Electronic Connectors |
Sales Range | $10 M to 50M |
# of Employees | 150 |
Plant Area |
40,500
ft2
|
Annual Production | 8,300,000
units
|
Production Hrs. Annual | 4,680
hrs
|
Location (State) | Mississippi |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $130,783 | 2,221,758 |
kWh
|
$0.059 |
Electricity Fees | $87,291 | - |
|
- |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $16,364 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $11,908 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Electricity Fees Savings | One-time Revenue or Avoided Cost Savings |
---|---|---|---|---|---|---|---|---|
01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $6,129 | $10,729 |
$4,382
93,464
kWh
|
$1,656
-
kW-mo/yr
|
$91 | - | |
02 | 4.231: Purchase equipment instead of leasing | $3,612 | $10,968 | - | - | - | $3,612 | |
03 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $2,816 | $9,213 |
$2,005
42,764
kWh
|
$769
-
kW-mo/yr
|
$42 | - | |
04 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $2,048 | $166 |
$1,978
43,030
kWh
|
- | $70 | - | |
05 | 2.7124: Make a practice of turning off lights when not needed | $915 | $1,175 |
$901
19,223
kWh
|
- | $14 | - | |
06 | 2.7135: Install occupancy sensors | $844 | $712 |
$832
17,741
kWh
|
- | $12 | - | |
TOTAL RECOMMENDED | $16,364 | $32,963 |
$10,098
216,222
kWh
|
$2,425
-
kW-mo/yr
|
$229 | $3,612 | ||
TOTAL IMPLEMENTED | $11,908 | $21,283 |
$9,266
198,481
kWh
|
$2,425
-
kW-mo/yr
|
$217 | - | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Electricity Fees Savings | One-time Revenue or Avoided Cost Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs