| Assessment Year | 2005 |
|---|---|
| Principal Product | Lumber |
| NAICS | 321999: All Other Miscellaneous Wood Product Manufacturing |
| SIC | 2421: Sawmills and Planing Mills, General |
| Sales Range | $10 M to 50M |
| # of Employees | 136 |
| Plant Area |
237,500
ft2
|
| Annual Production | 90,000
thousand feet
|
| Production Hrs. Annual | 2,500
hrs
|
| Location (State) | Alabama |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $586,915 | 16,286,795 |
kWh
|
$0.036 |
| Electricity Fees | $246,448 | - |
|
- |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $74,708 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $64,260 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Fees Savings |
|---|---|---|---|---|---|---|
| 01 | 2.7124: Make a practice of turning off lights when not needed | $34,961 | $10,692 |
$21,617
932,292
kWh
|
$13,344 | |
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $19,855 | $37,579 |
$13,723
454,595
kWh
|
$6,132 | |
| 03 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $6,062 | $6,270 |
$4,547
119,918
kWh
|
$1,515 | |
| 04 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $5,624 | $418 |
$4,368
89,845
kWh
|
$1,256 | |
| 05 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $3,820 | $10,945 |
$2,640
87,464
kWh
|
$1,180 | |
| 06 | 2.7261: Install timers and/or thermostats | $3,205 | $708 |
$2,182
71,923
kWh
|
$1,023 | |
| 07 | 3.6124: Burn waste oil for heat | $1,181 | $4,586 |
$1,051
34,409
kWh
|
$130 | |
| TOTAL RECOMMENDED | $74,708 | $71,198 |
$50,128
1,790,446
kWh
|
$24,580 | ||
| TOTAL IMPLEMENTED | $64,260 | $59,634 |
$42,348
1,564,196
kWh
|
$21,912 | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Fees Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs