| Assessment Year | 2003 |
|---|---|
| Principal Product | Plastic extrusion and plastic injection molded parts |
| NAICS | 326199: All Other Plastics Product Manufacturing |
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 200 |
| Plant Area |
132,000
ft2
|
| Annual Production | 33,840,000
lb
|
| Production Hrs. Annual | 84,000
hrs
|
| Location (State) | Mississippi |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Demand | $479,787 | 12,823,715 |
kW-mo/yr
|
$0.037 |
| Electricity Fees | $(-48,219.0) | - |
|
- |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $29,818 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $7,276 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Electricity Fees Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.3131: Reschedule plant operations or reduce load to avoid peaks | $18,996 | - | - |
$19,927
-
kW-mo/yr
|
$(-931.0) | |
| 02 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $4,859 | $2,372 |
$3,399
93,385
kWh
|
$1,698
-
kW-mo/yr
|
$(-238.0) | |
| 03 | 2.2511: Insulate bare equipment | $2,660 | $1,669 |
$2,791
76,663
kWh
|
- | $(-131.0) | |
| 04 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $2,417 | $205 |
$2,536
69,657
kWh
|
- | $(-119.0) | |
| 05 | 2.7261: Install timers and/or thermostats | $886 | $591 |
$930
25,538
kWh
|
- | $(-44.0) | |
| TOTAL RECOMMENDED | $29,818 | $4,837 |
$9,656
265,243
kWh
|
$21,625
-
kW-mo/yr
|
$(-1,463.0) | ||
| TOTAL IMPLEMENTED | $7,276 | $2,577 |
$5,935
163,042
kWh
|
$1,698
-
kW-mo/yr
|
$(-357.0) | ||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs