| Assessment Year | 1995 |
|---|---|
| Principal Product | Superabsorbant Polymers |
| NAICS |
n/a
|
| SIC | 2821: Plastics Materials, Synthetic Resins, and Nonvulcanizable Elastomers |
| Sales Range | $10 M to 50M |
| # of Employees | 108 |
| Plant Area |
65,892
ft2
|
| Annual Production | 36,000,000
lb
|
| Production Hrs. Annual | 6,240
hrs
|
| Location (State) | Mississippi |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $537,663 | 10,866,354 |
kWh
|
$0.049 |
| Natural Gas | $215,611 | 75,289 |
MMBtu
|
$2.86 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $17,086 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $839 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.3212: Optimize plant power factor | $7,796 | $4,500 |
$7,796
-
kWh
|
- | |
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $606 | $2,134 |
$606
8,206
kWh
|
- | |
| 03 | 2.4133: Use most efficient type of electric motors | $6,350 | $43,100 |
$6,350
128,957
kWh
|
- | |
| 04 | 2.2414: Use waste heat from hot flue gases to preheat | $918 | $2,400 | - |
$918
-
MMBtu
|
|
| 05 | 2.7261: Install timers and/or thermostats | $577 | $690 |
$577
19,343
kWh
|
- | |
| 06 | 2.7121: Utilize daylight whenever possible in lieu of artificial light | $839 | $120 |
$839
27,843
kWh
|
- | |
| TOTAL RECOMMENDED | $17,086 | $52,944 |
$16,168
184,349
kWh
|
$918
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $839 | $120 |
$839
27,843
kWh
|
- | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs