| Assessment Year | 1998 |
|---|---|
| Principal Product | Work Gloves |
| NAICS |
n/a
|
| SIC | 3151: Leather Gloves and Mittens |
| Sales Range | $10 M to 50M |
| # of Employees | 150 |
| Plant Area |
68,100
ft2
|
| Annual Production | 51,000
pieces
|
| Production Hrs. Annual | 2,000
hrs
|
| Location (State) | Missouri |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $31,155 | 463,951 |
kWh
|
$0.067 |
| Electricity Fees | $1,098 | - |
|
- |
| Natural Gas | $20,896 | 3,046 |
MMBtu
|
$6.86 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $17,194 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $1,735 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Solid Waste (non-haz) Savings | Ancillary Material Cost Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $879 | $587 | - | - | $879 | |
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $4,422 | $10,830 |
$4,422
63,599
kWh
|
- | - | |
| 03 | 2.4231: Reduce the pressure of compressed air to the minimum required | $428 | $40 |
$428
6,155
kWh
|
- | - | |
| 04 | 2.4221: Install compressor air intakes in coolest locations | $265 | $43 |
$265
3,810
kWh
|
- | - | |
| 05 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $163 | - |
$163
2,345
kWh
|
- | - | |
| 06 | 3.5315: Lease / purchase baler; sell cardboard to recycler | $10,725 | - | - |
$10,725
-
lb
|
- | |
| 07 | 3.5212: Regrind, reuse, or sell scrap plastic parts | $312 | - | - |
$312
-
lb
|
- | |
| TOTAL RECOMMENDED | $17,194 | $11,500 |
$5,278
75,909
kWh
|
$11,037
-
lb
|
$879 | ||
| TOTAL IMPLEMENTED | $1,735 | $670 |
$856
12,310
kWh
|
- | $879 | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Solid Waste (non-haz) Savings | Ancillary Material Cost Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs