| Assessment Year | 1993 |
|---|---|
| Principal Product | Fractional-Horsepower Electric Motor |
| NAICS |
n/a
|
| SIC | 3621: Motors and Generators |
| Sales Range | $10 M to 50M |
| # of Employees | 502 |
| Plant Area |
270,000
ft2
|
| Annual Production | 1,378,000
pieces
|
| Production Hrs. Annual | 6,192
hrs
|
| Location (State) | Missouri |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $750,745 | 14,246,483 |
kWh
|
$0.053 |
| Natural Gas | $42,328 | 6,616 |
MMBtu
|
$6.40 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $19,004 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $14,697 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|
| 01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $6,458 | $22,197 |
$6,458
122,509
kWh
|
- | |
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $3,402 | $956 |
$3,402
64,478
kWh
|
- | |
| 03 | 2.4221: Install compressor air intakes in coolest locations | $2,717 | $2,246 |
$2,717
51,583
kWh
|
- | |
| 04 | 2.4314: Use synthetic lubricant | $1,296 | $576 |
$1,296
24,619
kWh
|
- | |
| 05 | 2.4133: Use most efficient type of electric motors | $1,709 | $3,831 |
$1,709
32,532
kWh
|
- | |
| 06 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $411 | $105 |
$411
7,913
kWh
|
- | |
| 07 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $463 | $629 |
$463
8,792
kWh
|
- | |
| 08 | 2.8113: Purchase gas directly from a contract gas supplier | $2,548 | $300 | - | $2,548 | |
| TOTAL RECOMMENDED | $19,004 | $30,840 |
$16,456
312,426
kWh
|
$2,548 | ||
| TOTAL IMPLEMENTED | $14,697 | $29,335 |
$14,697
279,015
kWh
|
- | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Administrative Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs