| Assessment Year | 1992 |
|---|---|
| Principal Product | SAUSAGE AND BEEF PRODUCT |
| NAICS |
n/a
|
| SIC | 2013: Sausages and Other Prepared Meat Products |
| Sales Range | $10 M to 50M |
| # of Employees | 35 |
| Plant Area |
n/a
|
| Annual Production | 7,500,000
lb
|
| Production Hrs. Annual | 2,340
hrs
|
| Location (State) | Missouri |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $77,153 | 1,101,993 |
kWh
|
$0.070 |
| Natural Gas | $20,913 | 3,561 |
MMBtu
|
$5.87 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $5,924 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $4,586 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|---|
| 01 | 3.4115: Recover and reuse cooling water | $4,522 | $220 |
$29
293
kWh
|
- | $4,493 | |
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $272 | $270 |
$308
4,396
kWh
|
- | $(-36.0) | |
| 03 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $64 | $970 |
$64
879
kWh
|
- | - | |
| 04 | 2.4231: Reduce the pressure of compressed air to the minimum required | $362 | $50 |
$362
5,275
kWh
|
- | - | |
| 05 | 2.4221: Install compressor air intakes in coolest locations | $83 | $37 |
$83
1,172
kWh
|
- | - | |
| 06 | 2.4322: Use or replace with energy efficient substitutes | $412 | $1,075 | - |
$412
-
MMBtu
|
- | |
| 07 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $209 | - |
$209
2,931
kWh
|
- | - | |
| TOTAL RECOMMENDED | $5,924 | $2,622 |
$1,055
14,946
kWh
|
$412
-
MMBtu
|
$4,457 | ||
| TOTAL IMPLEMENTED | $4,586 | $1,190 |
$93
1,172
kWh
|
- | $4,493 | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs