| Assessment Year | 1994 |
|---|---|
| Principal Product | Sawn Lumber |
| NAICS |
n/a
|
| SIC | 2421: Sawmills and Planing Mills, General |
| Sales Range | $1 M to 5M |
| # of Employees | 26 |
| Plant Area |
130,680
ft2
|
| Annual Production | 4,000
thousand feet
|
| Production Hrs. Annual | 4,160
hrs
|
| Location (State) | Maine |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $48,227 | 301,290 |
kWh
|
$0.16 |
| LPG | $2,870 | 237 |
MMBtu
|
$12.11 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $66,464 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $57,467 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | LPG Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.3415: Use a fossil fuel engine to cogenerate electricity or motive power; and utilize heat | $56,050 | $77,000 | - | - | $56,050 | |
| 02 | 2.1311: Replace electrically-operated equipment with fossil fuel equipment | $3,810 | $4,800 |
$5,622
35,170
kWh
|
$(-1,812.0)
-
MMBtu
|
- | |
| 03 | 2.7447: Install vinyl strip / high speed / air curtain doors | $745 | $1,000 | - |
$745
-
MMBtu
|
- | |
| 04 | 2.7135: Install occupancy sensors | $430 | $250 |
$430
2,638
kWh
|
- | - | |
| 05 | 2.7121: Utilize daylight whenever possible in lieu of artificial light | $880 | $1,040 |
$880
5,275
kWh
|
- | - | |
| 06 | 2.4322: Use or replace with energy efficient substitutes | $3,132 | $1,760 |
$3,132
19,050
kWh
|
- | - | |
| 07 | 2.8123: Pay utility bills on time | $1,417 | - | - | - | $1,417 | |
| TOTAL RECOMMENDED | $66,464 | $85,850 |
$10,064
62,133
kWh
|
$(-1,067.0)
-
MMBtu
|
$57,467 | ||
| TOTAL IMPLEMENTED | $57,467 | $77,000 | - | - | $57,467 | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | LPG Savings | Administrative Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs