Assessment Year | 1993 |
---|---|
Principal Product | Flexible electric insula |
NAICS |
n/a
|
SIC | 2899: Chemicals and Chemical Preparations, Not Elsewhere Classified |
Sales Range | $5 M to 10M |
# of Employees | 56 |
Plant Area |
50,000
ft2
|
Annual Production | 1,166
thousand feet
|
Production Hrs. Annual | 4,704
hrs
|
Location (State) | Connecticut |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $110,287 | 976,846 |
kWh
|
$0.11 |
Natural Gas | $190,851 | 57,650 |
MMBtu
|
$3.31 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $42,512 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $18,399 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
---|---|---|---|---|---|---|
01 | 2.2211: Use optimum temperature | $22,157 | $11,271 | - |
$22,157
-
MMBtu
|
|
02 | 2.4146: Use adjustable frequency drive or multiple speed motors on existing system | $9,828 | $23,220 |
$9,828
87,046
kWh
|
- | |
03 | 2.2511: Insulate bare equipment | $6,041 | $1,622 | - |
$6,041
-
MMBtu
|
|
04 | 2.2414: Use waste heat from hot flue gases to preheat | $1,625 | $2,854 | - |
$1,625
-
MMBtu
|
|
05 | 2.4231: Reduce the pressure of compressed air to the minimum required | $1,721 | - |
$1,721
15,240
kWh
|
- | |
06 | 2.3132: Recharge batteries on during off-peak demand periods | $475 | - |
$475
-
kWh
|
- | |
07 | 2.4221: Install compressor air intakes in coolest locations | $430 | $230 |
$430
3,810
kWh
|
- | |
08 | 2.2122: Install / repair insulation on condensate lines | $235 | $247 | - |
$235
-
MMBtu
|
|
TOTAL RECOMMENDED | $42,512 | $39,444 |
$12,454
106,096
kWh
|
$30,058
-
MMBtu
|
||
TOTAL IMPLEMENTED | $18,399 | $27,926 |
$10,733
90,856
kWh
|
$7,666
-
MMBtu
|
||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs