Assessment Year | 1991 |
---|---|
Principal Product | FILTERS, REGULATORS, ETC |
NAICS |
n/a
|
SIC | 3569: General Industrial Machinery and Equipment, Not Elsewhere |
Sales Range | $10 M to 50M |
# of Employees | 194 |
Plant Area |
n/a
|
Annual Production | 550,000
pieces
|
Production Hrs. Annual | 4,375
hrs
|
Location (State) | Maine |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $227,597 | 2,691,383 |
kWh
|
$0.085 |
Fuel Oil #4 | $39,722 | 6,552 |
MMBtu
|
$6.06 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $21,450 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | $2,338 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Fuel Oil #4 Savings | Administrative Changes Savings |
---|---|---|---|---|---|---|---|
01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $14,565 | $30,000 |
$17,865
211,313
kWh
|
- | $(-3,300.0) | |
02 | 2.2414: Use waste heat from hot flue gases to preheat | $1,963 | - | - |
$1,963
-
MMBtu
|
- | |
03 | 2.3212: Optimize plant power factor | $1,759 | $4,685 |
$1,759
20,809
kWh
|
- | - | |
04 | 2.4221: Install compressor air intakes in coolest locations | $1,388 | $4,900 |
$1,388
15,826
kWh
|
- | - | |
05 | 2.4133: Use most efficient type of electric motors | $825 | $1,900 |
$825
9,672
kWh
|
- | - | |
06 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $520 | $1,749 |
$520
6,155
kWh
|
- | - | |
07 | 2.2122: Install / repair insulation on condensate lines | $430 | $170 | - |
$430
-
MMBtu
|
- | |
TOTAL RECOMMENDED | $21,450 | $43,404 |
$22,357
263,775
kWh
|
$2,393
-
MMBtu
|
$(-3,300.0) | ||
TOTAL IMPLEMENTED | $2,338 | $6,819 |
$1,908
21,981
kWh
|
$430
-
MMBtu
|
- | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Fuel Oil #4 Savings | Administrative Changes Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs