| Assessment Year | 1989 |
|---|---|
| Principal Product | MOLDED PLASTIC PRODUCTS |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $1 M to 5M |
| # of Employees | 40 |
| Plant Area |
n/a
|
| Annual Production | 2,000,000
pieces
|
| Production Hrs. Annual | 6,240
hrs
|
| Location (State) | Massachusetts |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $268,442 | 2,619,871 |
kWh
|
$0.10 |
| Natural Gas | $6,187 | 900 |
MMBtu
|
$6.87 |
| Fuel Oil #2 | $6,026 | 923 |
MMBtu
|
$6.53 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $8,966 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $1,507 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Fuel Oil #2 Savings |
|---|---|---|---|---|---|---|
| 01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $1,507 | $197 |
$1,507
14,654
kWh
|
- | |
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $1,897 | $5,985 |
$1,897
18,464
kWh
|
- | |
| 03 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $192 | - |
$192
1,758
kWh
|
- | |
| 04 | 2.4221: Install compressor air intakes in coolest locations | $1,411 | $300 |
$1,411
13,775
kWh
|
- | |
| 05 | 2.2437: Recover waste heat from equipment | $1,828 | $500 | - |
$1,828
-
MMBtu
|
|
| 06 | 2.2511: Insulate bare equipment | $2,131 | - |
$2,131
20,809
kWh
|
- | |
| TOTAL RECOMMENDED | $8,966 | $6,982 |
$7,138
69,460
kWh
|
$1,828
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $1,507 | $197 |
$1,507
14,654
kWh
|
- | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Fuel Oil #2 Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs