| Assessment Year | 1994 |
|---|---|
| Principal Product | containers |
| NAICS |
n/a
|
| SIC | 3085: Plastics Bottles |
| Sales Range | $10 M to 50M |
| # of Employees | 230 |
| Plant Area |
52,000
ft2
|
| Annual Production | 400,000
pieces
|
| Production Hrs. Annual | 8,568
hrs
|
| Location (State) | Missouri |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $362,780 | 6,282,532 |
kWh
|
$0.058 |
| Natural Gas | $21,635 | 4,241 |
MMBtu
|
$5.10 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $40,819 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $37,943 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings |
|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $18,883 | $17,955 |
$18,883
327,081
kWh
|
|
| 02 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $7,885 | $669 |
$7,885
136,577
kWh
|
|
| 03 | 2.4133: Use most efficient type of electric motors | $4,027 | $2,519 |
$4,027
69,754
kWh
|
|
| 04 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $4,251 | $5,809 |
$4,251
57,444
kWh
|
|
| 05 | 2.7135: Install occupancy sensors | $1,794 | $1,350 |
$1,794
31,067
kWh
|
|
| 06 | 2.7134: Use photocell controls | $305 | $60 |
$305
5,275
kWh
|
|
| 07 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $458 | $540 |
$458
4,689
kWh
|
|
| 08 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $340 | $220 |
$340
2,345
kWh
|
|
| 09 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $1,489 | $3,000 |
$1,489
25,791
kWh
|
|
| 10 | 2.4221: Install compressor air intakes in coolest locations | $1,387 | $90 |
$1,387
24,033
kWh
|
|
| TOTAL RECOMMENDED | $40,819 | $32,212 |
$40,819
684,056
kWh
|
||
| TOTAL IMPLEMENTED | $37,943 | $29,122 |
$37,943
634,232
kWh
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs