| Assessment Year | 1992 |
|---|---|
| Principal Product | METALIZED NYLON BALLOONS |
| NAICS |
n/a
|
| SIC | 3069: Fabricated Rubber Products, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 106 |
| Plant Area |
n/a
|
| Annual Production | 25,000,000
pieces
|
| Production Hrs. Annual | 6,000
hrs
|
| Location (State) | Kansas |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $134,430 | 1,961,899 |
kWh
|
$0.069 |
| Natural Gas | $17,087 | 4,017 |
MMBtu
|
$4.25 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $37,460 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $16,711 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.6121: Reduce hot water temperature to the minimum required | $12,201 | - |
$201
2,931
kWh
|
- | $12,000 | |
| 02 | 2.7111: Reduce illumination to minimum necessary levels | $11,934 | - |
$11,486
167,644
kWh
|
- | $448 | |
| 03 | 2.6232: Install set-back timers | $1,546 | $1,000 |
$1,546
22,567
kWh
|
- | - | |
| 04 | 2.6121: Reduce hot water temperature to the minimum required | $2,964 | $2,250 |
$2,964
43,376
kWh
|
- | - | |
| 05 | 2.2443: Re-use or recycle hot or cold process exhaust air | $2,491 | $4,158 | - |
$2,491
-
MMBtu
|
- | |
| 06 | 2.3191: Use demand controller or load shedder | $2,077 | $4,000 |
$2,077
-
kWh
|
- | - | |
| 07 | 2.4322: Use or replace with energy efficient substitutes | $962 | - |
$823
12,016
kWh
|
- | $139 | |
| 08 | 2.2511: Insulate bare equipment | $984 | $1,336 |
$984
14,361
kWh
|
- | - | |
| 09 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $886 | $1,050 |
$886
12,896
kWh
|
- | - | |
| 10 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $813 | $120 |
$813
12,016
kWh
|
- | - | |
| 11 | 2.4221: Install compressor air intakes in coolest locations | $602 | $220 |
$602
8,792
kWh
|
- | - | |
| TOTAL RECOMMENDED | $37,460 | $14,134 |
$22,382
296,599
kWh
|
$2,491
-
MMBtu
|
$12,587 | ||
| TOTAL IMPLEMENTED | $16,711 | $3,250 |
$4,711
68,874
kWh
|
- | $12,000 | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs