| Assessment Year | 1989 |
|---|---|
| Principal Product | INJECTION MOLDED PLASTIC |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $5 M to 10M |
| # of Employees | 130 |
| Plant Area |
n/a
|
| Annual Production | 9,000,000
lb
|
| Production Hrs. Annual | 7,200
hrs
|
| Location (State) | Kansas |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $221,409 | 5,448,124 |
kWh
|
$0.041 |
| Natural Gas | $10,075 | 2,636 |
MMBtu
|
$3.82 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $8,177 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $3,215 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.2511: Insulate bare equipment | $3,621 | $500 |
$3,621
89,097
kWh
|
- | |
| 02 | 2.6212: Turn off equipment during breaks, reduce operating time | $2,382 | - |
$2,382
58,617
kWh
|
- | |
| 03 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $1,048 | $2,032 |
$1,048
25,791
kWh
|
- | |
| 04 | 2.7447: Install vinyl strip / high speed / air curtain doors | $440 | $100 | - |
$440
-
MMBtu
|
|
| 05 | 2.6121: Reduce hot water temperature to the minimum required | $250 | - |
$250
6,155
kWh
|
- | |
| 06 | 2.1311: Replace electrically-operated equipment with fossil fuel equipment | $293 | $560 |
$488
12,016
kWh
|
$(-195.0)
-
MMBtu
|
|
| 07 | 2.4231: Reduce the pressure of compressed air to the minimum required | $143 | $40 |
$143
3,517
kWh
|
- | |
| TOTAL RECOMMENDED | $8,177 | $3,232 |
$7,932
195,193
kWh
|
$245
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $3,215 | $140 |
$2,775
68,289
kWh
|
$440
-
MMBtu
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs