| Assessment Year | 1988 |
|---|---|
| Principal Product | CUSTOM INJECT MOLDED PTS |
| NAICS |
n/a
|
| SIC | 3089: Plastics Products, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 100 |
| Plant Area |
n/a
|
| Annual Production | 0
units
|
| Production Hrs. Annual | 6,240
hrs
|
| Location (State) | Missouri |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $417,418 | 7,077,081 |
kWh
|
$0.059 |
| Natural Gas | $7,102 | 1,718 |
MMBtu
|
$4.13 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $68,225 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings |
|---|---|---|---|---|---|
| 01 | 2.8121: Apply for tax-free status for energy purchases | $43,671 | - |
$43,671
-
kWh
|
|
| 02 | 2.2621: Modify refrigeration system to operate at a lower pressure | $7,119 | $14,000 |
$7,119
120,750
kWh
|
|
| 03 | 2.2621: Modify refrigeration system to operate at a lower pressure | $3,957 | $2,400 |
$3,957
67,116
kWh
|
|
| 04 | 2.7228: Avoid introducing hot, humid, or dirty air into hvac system | $4,268 | $2,000 |
$4,268
72,392
kWh
|
|
| 05 | 2.4221: Install compressor air intakes in coolest locations | $743 | $400 |
$743
12,603
kWh
|
|
| 06 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $4,683 | $7,109 |
$4,683
79,426
kWh
|
|
| 07 | 2.2511: Insulate bare equipment | $2,592 | $3,600 |
$2,592
43,962
kWh
|
|
| 08 | 2.4312: Improve lubrication practices | $1,192 | - |
$1,192
20,223
kWh
|
|
| TOTAL RECOMMENDED | $68,225 | $29,509 |
$68,225
416,472
kWh
|
||
| TOTAL IMPLEMENTED | - | - | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs