| Assessment Year | 1994 |
|---|---|
| Principal Product | Variety Bread |
| NAICS |
n/a
|
| SIC | 2099: Food Preparations, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 150 |
| Plant Area |
60,000
ft2
|
| Annual Production | 488,500,000
lb
|
| Production Hrs. Annual | 5,200
hrs
|
| Location (State) | Texas |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $136,758 | 2,091,442 |
kWh
|
$0.065 |
| Natural Gas | $108,829 | 25,650 |
MMBtu
|
$4.24 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $27,639 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | - | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.1133: Adjust burners for efficient operation | $8,262 | $2,500 | - |
$8,262
-
MMBtu
|
|
| 02 | 2.1233: Analyze flue gas for proper air/fuel ratio | $4,500 | $2,500 | - |
$4,500
-
MMBtu
|
|
| 03 | 2.6218: Turn off equipment when not in use | $3,929 | - |
$3,929
68,581
kWh
|
- | |
| 04 | 2.4133: Use most efficient type of electric motors | $2,984 | $7,370 |
$2,984
59,496
kWh
|
- | |
| 05 | 2.2437: Recover waste heat from equipment | $2,527 | $8,800 | - |
$2,527
-
MMBtu
|
|
| 06 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $2,017 | $810 |
$2,017
60,668
kWh
|
- | |
| 07 | 2.7261: Install timers and/or thermostats | $1,662 | $300 |
$1,662
50,117
kWh
|
- | |
| 08 | 2.1213: Direct warmest air to combustion intake | $1,387 | $100 | - |
$1,387
-
MMBtu
|
|
| 09 | 2.7135: Install occupancy sensors | $371 | $260 |
$371
11,137
kWh
|
- | |
| TOTAL RECOMMENDED | $27,639 | $22,640 |
$10,963
249,999
kWh
|
$16,676
-
MMBtu
|
||
| TOTAL IMPLEMENTED | - | - | - | - | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs