Assessment Year | 2024 |
---|---|
Principal Product | Magnet Wire |
NAICS | 331420: Copper Rolling, Drawing, Extruding, and Alloying |
SIC | 3351: Rolling, Drawing, and Extruding Of Copper |
Sales Range | $50 M to 100M |
# of Employees | 135 |
Plant Area |
329,613
ft2
|
Annual Production | 138,000,000
lb
|
Production Hrs. Annual | 8,760
hrs
|
Location (State) | Indiana |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | ||
---|---|---|---|---|---|
Electricity Usage | $2,012,451 | 31,897,952 |
kWh
|
$0.063 | |
Electricity Demand | $837,931 | 51,660 |
kW-mo/yr
|
$16.22 | |
Electricity Fees | $7,896 | - |
|
- | |
Natural Gas | $901,965 | 180,347 |
MMBtu
|
$5.00 | |
Waste Disposal Costs | |||||
Water Usage | $19,296 | 9,230 |
Tgal
|
$2.09 | |
TOTAL YEARLY COSTS | $3,779,539 | ||||
RECOMMENDED SAVINGS* | $141,947 |
See individual recommendations below
*Non-energy impacts included in savings.
|
|||
IMPLEMENTED SAVINGS* | $141,947 |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings |
---|---|---|---|---|---|---|---|
01 | 2.3191: Use demand controller or load shedder | $14,493 | - | - |
$14,493
-
kW-mo/yr
|
- | |
02 | 2.2163: Use minimum steam operating pressure | $83,429 | $20,365 | - | - |
$83,429
-
MMBtu
|
|
03 | 2.4221: Install compressor air intakes in coolest locations | $8,667 | $2,615 |
$7,093
112,584
kWh
|
$1,574
-
kW-mo/yr
|
- | |
04 | 2.4146: Use adjustable frequency drive or multiple speed motors on existing system | $31,216 | $17,960 |
$31,216
496,214
kWh
|
- | - | |
05 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $4,142 | $12,019 |
$3,062
48,604
kWh
|
$1,080
-
kW-mo/yr
|
- | |
TOTAL RECOMMENDED | $141,947 | $52,959 |
$41,371
657,402
kWh
|
$17,147
-
kW-mo/yr
|
$83,429
-
MMBtu
|
||
TOTAL IMPLEMENTED | $141,947 | $52,959 |
$41,371
657,402
kWh
|
$17,147
-
kW-mo/yr
|
$83,429
-
MMBtu
|
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs