| Assessment Year | 1993 |
|---|---|
| Principal Product | Hand tools,containers an |
| NAICS |
n/a
|
| SIC | 3399: Primary Metal Products, Not Elsewhere Classified |
| Sales Range | $1 M to 5M |
| # of Employees | 33 |
| Plant Area |
50,000
ft2
|
| Annual Production | 0
units
|
| Production Hrs. Annual | 2,496
hrs
|
| Location (State) | Massachusetts |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $30,202 | 237,691 |
kWh
|
$0.13 |
| Fuel Oil #2 | $11,419 | 2,274 |
MMBtu
|
$5.02 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $10,327 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $9,396 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Fuel Oil #2 Savings | Water Consumption Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $3,690 | $435 |
$3,690
29,015
kWh
|
- | - | |
| 02 | 2.3212: Optimize plant power factor | $3,380 | $6,000 |
$3,380
-
kWh
|
- | - | |
| 03 | 3.4115: Recover and reuse cooling water | $1,407 | $200 |
$(-75.0)
(-586)
kWh
|
- |
$1,482
-
Tgal
|
|
| 04 | 2.7135: Install occupancy sensors | $596 | $710 |
$596
4,689
kWh
|
- | - | |
| 05 | 2.2122: Install / repair insulation on condensate lines | $548 | $151 |
$548
9,379
kWh
|
- | - | |
| 06 | 2.1233: Analyze flue gas for proper air/fuel ratio | $371 | $400 | - |
$371
-
MMBtu
|
- | |
| 07 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $335 | - |
$335
2,638
kWh
|
- | - | |
| TOTAL RECOMMENDED | $10,327 | $7,896 |
$8,474
45,135
kWh
|
$371
-
MMBtu
|
$1,482
-
Tgal
|
||
| TOTAL IMPLEMENTED | $9,396 | $7,186 |
$7,543
37,808
kWh
|
$371
-
MMBtu
|
$1,482
-
Tgal
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Fuel Oil #2 Savings | Water Consumption Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs