| Assessment Year | 2013 |
|---|---|
| Principal Product | Hydraulic Control Valves |
| NAICS | 332912: Fluid Power Valve and Hose Fitting Manufacturing |
| SIC | 3492: Fluid Power Valves and Hose Fittings |
| Sales Range | $10 M to 50M |
| # of Employees | 36 |
| Plant Area |
61,520
ft2
|
| Annual Production | 26,493
pieces
|
| Production Hrs. Annual | 4,250
hrs
|
| Location (State) | Indiana |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $115,039 | 1,190,400 |
kWh
|
$0.097 |
| Natural Gas | $9,729 | 1,171 |
MMBtu
|
$8.31 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $21,049 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $9,340 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|
| 01 | 2.4231: Reduce the pressure of compressed air to the minimum required | $4,300 | - |
$4,300
46,219
kWh
|
- | |
| 02 | 2.7221: Lower temperature during the winter season and vice-versa | $3,348 | - |
$3,348
36,000
kWh
|
- | |
| 03 | 2.7111: Reduce illumination to minimum necessary levels | $1,778 | - |
$1,778
19,117
kWh
|
- | |
| 04 | 2.6218: Turn off equipment when not in use | $1,410 | - |
$1,410
15,163
kWh
|
- | |
| 05 | 2.2437: Recover waste heat from equipment | $4,867 | $625 | - |
$4,867
-
MMBtu
|
|
| 06 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $4,216 | $699 |
$4,216
46,275
kWh
|
- | |
| 07 | 2.7135: Install occupancy sensors | $306 | $58 |
$306
3,294
kWh
|
- | |
| 08 | 2.6231: Utilize controls to operate equipment only when needed | $824 | $176 |
$824
8,864
kWh
|
- | |
| TOTAL RECOMMENDED | $21,049 | $1,558 |
$16,182
174,932
kWh
|
$4,867
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $9,340 | $875 |
$9,340
101,358
kWh
|
- | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs