| Assessment Year | 2024 |
|---|---|
| Principal Product | Fabricated Tube Assemblies, Sheet Metal Fabrication and Enclosures |
| NAICS | 331210: Iron and Steel Pipe and Tube Manufacturing from Purchased Steel |
| SIC | 3324: Steel Investment Foundries |
| Sales Range | $50 M to 100M |
| # of Employees | 227 |
| Plant Area |
154,012
ft2
|
| Annual Production | 667,513
units
|
| Production Hrs. Annual | 7,072
hrs
|
| Location (State) | Illinois |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | ||
|---|---|---|---|---|---|
| Electricity Usage | $164,104 | 2,770,353 |
kWh
|
$0.059 | |
| Electricity Demand | $59,029 | 6,235 |
kW-mo/yr
|
$9.47 | |
| Electricity Fees | $32,433 | - |
|
- | |
| Natural Gas | $514,579 | 54,065 |
MMBtu
|
$9.52 | |
| Waste Disposal Costs | |||||
| Water Usage | $130,623 | 1,963 |
Tgal
|
$66.55 | |
| TOTAL YEARLY COSTS | $900,767 | ||||
| RECOMMENDED SAVINGS* | $493,852 |
See individual recommendations below
*Non-energy impacts included in savings.
|
|||
| IMPLEMENTED SAVINGS* | $26,875 | ||||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.9114: Use solar heat to make electricty | $82,148 | $379,057 |
$42,932
727,667
kWh
|
$39,215
-
kW-mo/yr
|
- | |
| 02 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $1,959 | $820 |
$217
3,682
kWh
|
$1,742
-
kW-mo/yr
|
- | |
| 03 | 2.4236: Eliminate leaks in inert gas and compressed air lines/ valves | $1,478 | $227 |
$1,161
19,685
kWh
|
$316
-
kW-mo/yr
|
- | |
| 04 | 2.4221: Install compressor air intakes in coolest locations | $1,069 | $442 |
$841
14,255
kWh
|
$228
-
kW-mo/yr
|
- | |
| 05 | 2.2511: Insulate bare equipment | $6,223 | $2,225 | - | - |
$6,223
-
MMBtu
|
|
| 06 | 2.7135: Install occupancy sensors | $1,133 | $1,850 |
$715
12,119
kWh
|
$418
-
kW-mo/yr
|
- | |
| 07 | 2.4239: Eliminate or reduce compressed air usage | $14,991 | $7,497 |
$9,034
153,117
kWh
|
$5,957
-
kW-mo/yr
|
- | |
| 08 | 2.4322: Use or replace with energy efficient substitutes | $525 | $242 |
$363
6,160
kWh
|
$161
-
kW-mo/yr
|
- | |
| 09 | 2.3132: Recharge batteries on during off-peak demand periods | $2,224 | - | - |
$2,224
-
kW-mo/yr
|
- | |
| 10 | 2.5113: Use direct flame impingement or infrared processing for chamber type heating | $369,968 | $14,366 | - | - |
$369,968
-
MMBtu
|
|
| 11 | 2.5113: Use direct flame impingement or infrared processing for chamber type heating | $12,134 | $7,693 | - | - |
$12,134
-
MMBtu
|
|
| TOTAL RECOMMENDED | $493,852 | $414,419 |
$55,265
936,685
kWh
|
$50,263
-
kW-mo/yr
|
$388,325
-
MMBtu
|
||
| TOTAL IMPLEMENTED | $26,875 | $10,769 |
$10,413
176,484
kWh
|
$10,240
-
kW-mo/yr
|
$6,223
-
MMBtu
|
||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Electricity Demand Savings | Natural Gas Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs