| Assessment Year | 1995 |
|---|---|
| Principal Product | parts for hammer mills |
| NAICS |
n/a
|
| SIC | 3499: Fabricated Metal Products, Not Elsewhere Classified |
| Sales Range | $10 M to 50M |
| # of Employees | 82 |
| Plant Area |
96,000
ft2
|
| Annual Production | 6,000,000
lb
|
| Production Hrs. Annual | 8,736
hrs
|
| Location (State) | Iowa |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $72,439 | 1,527,843 |
kWh
|
$0.047 |
| Natural Gas | $25,799 | 5,628 |
MMBtu
|
$4.58 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $22,046 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $14,343 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|
| 01 | 2.4133: Use most efficient type of electric motors | $7,851 | $1,430 |
$7,851
165,592
kWh
|
- | |
| 02 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $1,408 | $2,337 |
$1,408
29,601
kWh
|
- | |
| 03 | 2.8113: Purchase gas directly from a contract gas supplier | $6,078 | $4,200 | - | $6,078 | |
| 04 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $4,582 | $17,644 |
$4,582
96,717
kWh
|
- | |
| 05 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $1,196 | $797 |
$1,196
25,205
kWh
|
- | |
| 06 | 2.7135: Install occupancy sensors | $497 | $308 |
$497
10,551
kWh
|
- | |
| 07 | 2.4314: Use synthetic lubricant | $217 | $168 |
$217
4,689
kWh
|
- | |
| 08 | 2.4221: Install compressor air intakes in coolest locations | $217 | $125 |
$217
4,689
kWh
|
- | |
| TOTAL RECOMMENDED | $22,046 | $27,009 |
$15,968
337,044
kWh
|
$6,078 | ||
| TOTAL IMPLEMENTED | $14,343 | $20,304 |
$14,343
302,754
kWh
|
- | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Administrative Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs