| Assessment Year | 1994 |
|---|---|
| Principal Product | Aluminum Die Casting |
| NAICS |
n/a
|
| SIC | 3363: Aluminum Die-Castings |
| Sales Range | $1 M to 5M |
| # of Employees | 25 |
| Plant Area |
19,000
ft2
|
| Annual Production | 628,000
lb
|
| Production Hrs. Annual | 2,340
hrs
|
| Location (State) | New Jersey |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $83,978 | 822,098 |
kWh
|
$0.10 |
| Natural Gas | $46,586 | 10,082 |
MMBtu
|
$4.62 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $9,858 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $9,858 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|
| 01 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $1,404 | $2,245 |
$1,404
13,775
kWh
|
- | |
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $75 | $205 |
$75
879
kWh
|
- | |
| 03 | 2.7124: Make a practice of turning off lights when not needed | $630 | - |
$630
6,155
kWh
|
- | |
| 04 | 2.4133: Use most efficient type of electric motors | $400 | $1,132 |
$400
3,810
kWh
|
- | |
| 05 | 2.4221: Install compressor air intakes in coolest locations | $361 | $200 |
$361
3,517
kWh
|
- | |
| 06 | 2.8113: Purchase gas directly from a contract gas supplier | $6,988 | $2,000 | - | $6,988 | |
| TOTAL RECOMMENDED | $9,858 | $5,782 |
$2,870
28,136
kWh
|
$6,988 | ||
| TOTAL IMPLEMENTED | $9,858 | $5,782 |
$2,870
28,136
kWh
|
$6,988 | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Administrative Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs