Assessment Year | 1999 |
---|---|
Principal Product | Printed Bags |
NAICS |
n/a
|
SIC | 3081: Unsupported Plastics Film and Sheet |
Sales Range | $1 M to 5M |
# of Employees | 32 |
Plant Area |
35,000
ft2
|
Annual Production | 84,000,000
pieces
|
Production Hrs. Annual | 7,200
hrs
|
Location (State) | Georgia |
Facility Energy Cost and Usage
Source | Yearly Cost | Usage | Unit Cost | |
---|---|---|---|---|
Electricity Usage | $60,100 | 1,710,434 |
kWh
|
$0.035 |
Electricity Fees | $6,919 | - |
|
- |
Natural Gas | $56,440 | 10,403 |
MMBtu
|
$5.43 |
TOTAL YEARLY COSTS | - | |||
RECOMMENDED SAVINGS* | $46,507 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
IMPLEMENTED SAVINGS* | - |
Recommendations
# | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Other Liquid (haz) Savings | Administrative Changes Savings |
---|---|---|---|---|---|---|---|---|
01 | 4.821: Pay bills on time to avoid late fees | $6,000 | - | - | - | - | $6,000 | |
02 | 4.652: Replace existing equipment with more suitable substitutes | $5,110 | $7,000 |
$1,510
38,687
kWh
|
- | - | $3,600 | |
03 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $2,422 | $7,508 |
$2,422
58,617
kWh
|
- | - | - | |
04 | 2.2443: Re-use or recycle hot or cold process exhaust air | $3,118 | $5,050 | - |
$3,118
-
MMBtu
|
- | - | |
05 | 2.4221: Install compressor air intakes in coolest locations | $410 | $300 |
$410
10,551
kWh
|
- | - | - | |
06 | 3.8121: Cover containers to minimize evaporative losses | $29,340 | - | - | - |
$29,340
-
gal
|
- | |
07 | 3.8143: Recycle cleaning solvent and reuse | $107 | $320 | - | - |
$107
-
gal
|
- | |
TOTAL RECOMMENDED | $46,507 | $20,178 |
$4,342
107,855
kWh
|
$3,118
-
MMBtu
|
$29,447
-
gal
|
$9,600 | ||
TOTAL IMPLEMENTED | - | - | - | - | - | - | ||
Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Other Liquid (haz) Savings | Administrative Changes Savings |
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs