| Assessment Year | 1989 |
|---|---|
| Principal Product | POULTRY |
| NAICS |
n/a
|
| SIC | 2015: Poultry Slaughtering and Processing |
| Sales Range | $50 M to 100M |
| # of Employees | 575 |
| Plant Area |
n/a
|
| Annual Production | 68,000,000
pieces
|
| Production Hrs. Annual | 4,160
hrs
|
| Location (State) | Georgia |
Facility Energy Cost and Usage
| Source | Yearly Cost | Usage | Unit Cost | |
|---|---|---|---|---|
| Electricity Usage | $638,137 | 12,383,939 |
kWh
|
$0.052 |
| Natural Gas | $150,811 | 50,391 |
MMBtu
|
$2.99 |
| TOTAL YEARLY COSTS | - | |||
| RECOMMENDED SAVINGS* | $100,230 |
See individual recommendations below
*Non-energy impacts included in savings.
|
||
| IMPLEMENTED SAVINGS* | $85,750 | |||
Recommendations
| # | Description | Yearly Savings* | Imp'd Cost* | Status | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings |
|---|---|---|---|---|---|---|---|
| 01 | 2.1233: Analyze flue gas for proper air/fuel ratio | $1,040 | - | - |
$1,940
-
MMBtu
|
$(-900.0) | |
| 02 | 2.7142: Utilize higher efficiency lamps and/or ballasts | $604 | $2,400 |
$604
11,723
kWh
|
- | - | |
| 03 | 2.2511: Insulate bare equipment | $534 | $1,020 | - |
$534
-
MMBtu
|
- | |
| 04 | 2.2136: Install / repair insulation on steam lines | $423 | $210 | - |
$423
-
MMBtu
|
- | |
| 05 | 2.4221: Install compressor air intakes in coolest locations | $219 | $350 |
$219
4,396
kWh
|
- | - | |
| 06 | 2.2624: Use cold waste water to cool chiller feed water | $14,480 | $16,950 |
$14,480
281,360
kWh
|
- | - | |
| 07 | 2.2437: Recover waste heat from equipment | $68,230 | $29,500 | - |
$68,230
-
MMBtu
|
- | |
| 08 | 2.4111: Utilize energy-efficient belts and other improved mechanisms | $14,700 | - |
$14,700
285,463
kWh
|
- | - | |
| TOTAL RECOMMENDED | $100,230 | $50,430 |
$30,003
582,942
kWh
|
$71,127
-
MMBtu
|
$(-900.0) | ||
| TOTAL IMPLEMENTED | $85,750 | $33,480 |
$15,523
301,582
kWh
|
$71,127
-
MMBtu
|
$(-900.0) | ||
| Yearly Savings* | Imp'd Cost* | Electricity Usage Savings | Natural Gas Savings | Administrative Changes Savings | |||
*Savings and costs are best estimates based on the center's site visit, associated engineering analysis, and typical capital and labor costs